Whirlpool Oven Error Codes
Whirlpool ovens and ranges show an F- or F#E# code when the control detects a fault. Here's what the common ones mean.
F1 / F1E0
Means: Control board (EOC) fault.
Fix: Cut power for 5 minutes to reset. If F1 returns, the electronic oven control needs replacing.
F2 / F2E0
Means: Oven overheated, or a keypad is stuck.
Fix: Let the oven cool and power-cycle. Check no button is jammed; a genuine overheat points to the temperature sensor or relay.
F3 / F3E0
Means: Open oven temperature sensor (RTD).
Fix: Check the sensor plug at the rear; replace the temperature sensor if its resistance is out of range.
F5 / F5E0
Means: Door latch / self-clean lock fault.
Fix: Inspect the door lock motor and switch; the latch assembly commonly needs replacement.
F9 / F9E0
Means: Door lock circuit fault.
Fix: Power-cycle to reset; a persistent F9 means the lock assembly or its wiring needs service.
FAQ
How do I reset a Whirlpool oven?
Turn off the oven's circuit breaker for about 5 minutes, then switch it back on. This clears transient F-codes. Codes that immediately return point to a failed sensor or control board.
What does F3 mean on a Whirlpool oven?
F3 (or F3E0) is an open oven temperature sensor. Check the sensor's connector at the back of the oven; if it's plugged in and the code stays, replace the temperature sensor.