🔧 Fix Appliance Error

Samsung Washer Not Spinning

If your Samsung washer fills and washes but won't spin, the most common causes are an unbalanced load, water that hasn't drained, or too much suds. Fix the balance and drainage first — a genuine part failure is rare.

UB / Ub / UE

Means: Unbalanced load — the drum couldn't distribute laundry evenly, so it refuses to spin at speed.

Fix: Stop the cycle, open the door, and redistribute the laundry. Wash bulky single items with a couple of towels.

4C / 4E

Means: Water supply / drain fault — if the washer can't drain, it won't spin.

Fix: Check the drain hose and pump filter. See our Samsung 4C page for the full fix.

Sud / SuدS

Means: Too much suds — the machine pauses spinning to clear foam.

Fix: Use less detergent and run a rinse. Switch to HE detergent for front-loaders.

Why a Samsung washer won't spin

  • Unbalanced load (most common): a single heavy item or tangled laundry stops high-speed spin. Shows as UB/Ub/UE.
  • Water not drained: the washer won't spin on a full tub. Check for a 4C drain fault.
  • Excess suds: too much or non-HE detergent triggers a Sud hold.
  • Worn drive belt or motor: rare, but possible if the drum spins freely by hand yet never powers up.

Fix it step by step

  1. Open the door and redistribute the load evenly around the drum.
  2. Confirm the washer has drained; if not, clean the pump filter and drain hose.
  3. Reduce detergent to one tablespoon of HE detergent and run a rinse+spin.
  4. Level the machine — rocking feet worsen unbalance trips.
  5. Spin the empty drum by hand; if it grinds or won't turn, the belt or bearing may need service.

For coded faults see the full Samsung washer error codes list.

FAQ

Why won't my Samsung washer spin but it drains?

Usually an unbalanced load (UB/Ub/UE) or excess suds. Redistribute the laundry and cut detergent.

What does 4C mean on a Samsung that won't spin?

4C is a water supply/drain fault — if the tub can't drain, the washer skips the spin. Check the drain hose and pump filter.

How do I reset a Samsung washer that won't spin?

Turn it off, unplug for one minute, redistribute the load, then restart on a spin-only cycle.

Other brands & appliances