🔧 Fix Appliance Error

LG LE Error Code

LE on an LG washer is a motor-overload fault: the direct-drive motor drew too much current or stalled, so the control stopped the cycle to protect it. It's often just an overloaded drum or a one-off stall — a reset and a lighter load usually clears it.

Got a different code? Search all 154 error codes →

LE / 1E

Means: Locked-motor / overload error — the rotor stalled or the motor pulled too much current, commonly from an overloaded or jammed drum. On some models the Hall sensor on the motor is the trigger.

Fix: Unplug for 1 minute to reset, remove half the load, and restart. If it recurs on light loads, check the drum for a trapped item and inspect the motor's Hall sensor connector.

What causes an LG LE error

LE fires when the direct-drive motor can't turn freely or draws excess current. In order of likelihood:

  • Overloaded drum (most common): too much laundry stalls the motor on spin ramp-up. Cutting the load in half usually fixes it.
  • Trapped item jamming the drum: a sock or underwire stuck between the drum and tub stops rotation.
  • One-off stall / power glitch: a brief stall can latch LE until the washer is reset.
  • Loose Hall-sensor connector: the sensor that tracks rotor position on the back of the motor can work loose and report a false stall.
  • Failing motor or rotor: rare — a worn rotor magnet or motor winding can throw LE repeatedly.

Step-by-step fix

  1. Turn the washer off and unplug it for at least one minute to clear the fault latch.
  2. Remove about half the laundry — overloading is the leading trigger.
  3. Reach into the drum and feel for any trapped item between the drum and the rubber gasket.
  4. Plug back in and run a Spin or Rinse+Spin cycle to confirm LE is gone.
  5. If it returns on light loads, unplug and check the Hall-sensor connector on the back of the motor is fully seated.

When to call a technician

If LE keeps returning after a reset, a lighter load and a reseated sensor connector, the rotor, stator or Hall sensor may need testing or replacement. Many LG direct-drive motors are covered by a 10-year parts warranty — check your model before paying for parts. For other faults, see the full LG washer error codes list.

FAQ

What does LE mean on an LG washer?

LE is a locked-motor or overload error — the direct-drive motor stalled or drew too much current, usually because the drum is overloaded or jammed.

How do I reset an LG LE error?

Unplug the washer for one minute, remove about half the load, then restart on a spin cycle. The reset clears the fault latch so it can try again.

Is an LG LE error expensive to fix?

Usually not — it's most often just an overloaded drum. Even if the motor's Hall sensor or rotor is at fault, LG direct-drive motors often carry a 10-year parts warranty.

Other brands & appliances