Maytag Washer Not Spinning
If your Maytag washer fills and washes but won't spin the clothes dry, the cause is usually a load that won't balance, a lid-lock/switch fault, or water the machine couldn't drain (it won't spin on a full tub). Rebalance and check the drain first.
F7 E1 / Ld
Means: Motor/speed or long-drain fault — the machine couldn't reach spin speed or couldn't drain before spin.
Fix: Redistribute the load, clear the drain, and check the lid lock.
Why a Maytag washer won't spin
- Unbalanced load: a single heavy item or tangled load makes the washer abort the spin to protect itself — the #1 cause.
- Won't drain first: a washer won't spin on a full tub; a clogged pump filter or hose stops both.
- Lid lock / lid switch fault: top-loaders won't spin if the lid isn't sensed as locked.
- Worn drive components: on high-mileage machines the clutch or drive block can wear.
Fix it in 5 steps
- Open the lid, redistribute the load evenly, and restart a spin cycle.
- If water remains, clear the drain pump filter and check the drain hose.
- Check the lid lock engages and clicks; inspect the lid switch/striker.
- Run a Rinse & Spin to test.
- If it still won't spin with a balanced, drained tub, suspect the drive/clutch.
For coded faults, see the full Maytag washer error codes list.
FAQ
Why won't my Maytag washer spin the clothes dry?
Usually an unbalanced load or leftover water it couldn't drain — a washer won't spin on a full tub. Rebalance the load and clear the drain pump filter.
Can a lid lock stop a Maytag from spinning?
Yes. Top-load Maytags won't spin unless the lid lock engages. Check that the lid clicks locked and the switch/striker isn't broken.